Product Description
Balluff BHS005R Inductive Sensors
Part # BHS005R Model Code: BHS B135V-PSD15-S04 Additional Info: Inductive Sensors, DC 3/4-wire Next Day Fittings is an authorized Balluff Distributor. If you have any questions about the Balluff BHS005R Inductive Sensors's technical information or availability please call us at: 844-323-8752Next Day Fittings is an official Balluff distributor, we can offer our customers the best pricing and factory lead times. Our trained and knowledgeable staff is always ready to help with any aspect of the Balluff product purchasing process. Whether you need assistance from a customer service agent or a product engineering expert, Next Day Fittings is your Balluff partner every step of the way.Inductive sensor, Connector, Normally open (NO), PNP, Sn: 1.50 mm, Flush (shielded), M12x1
Protection type IEC 60529 | IP68 |
Diagnostic coverage | 0 % |
Functional safety | no |
Mission Time | 20 a |
Approval/Conformity | CE cULus EAC |
Basic standard | IEC 60947-5-2 |
Housing material | Stainless steel (1.4104) |
Material sensing surface | Ceramic |
Dimension | ∅ 12 x 78 mm |
Installation | for flush mounting |
Size | M12x1 |
Tightening torque | 15 Nm ±10 % |
Switching output | PNP Normally open (NO) |
Assured operating distance Sa | 1.21 mm |
Range | 1.5 mm |
Function indicator | no |
Power indicator | no |
Connection | M12x1-Connector, 4-pole, A- coded |
Polarity reversal protected | yes |
Short-circuit protection | yes |
Hysteresis H max# (% of Sr) | 15.0 % |
Load capacitance max# at Ue | 0.5 ?F |
MTTF (40°C) | 500 a |
No-load current lo max#- undamped | 8 mA |
Operating voltage Ub | 10...30 VDC |
Output resistance Ra | 33.0 kOhm + 2D |
Pollution degree | 3 |
Protected against miswiring | yes |
Rated insulation voltage Ui | 75 V DC |
Rated operating current Ie DC | 200 mA |
Rated operating voltage Ue DC | 24 V |
Rated short circuit current | 100 A |
Ready delay tv max# | 20 ms |
Repeat accuracy max# (% of Sr) | 5.0 % |
Residual current Ir max# | 10 ?A |
Switching frequency | 400 Hz |
Utilization category | DC -13 |
Voltage drop static max# | 2.5 V |
Ambient temperature | -25...120°C |
Rated operating distance Sn | 1.5 mm |
Ripple max# (% of Ue) | 15 % |
Temperature drift max# (% of Sr) | 15 % |
Fastening detail | M12x1 |
Gasket- material | FPM 80 |
Thrust ring- part number | 150229 |
Support ring material | PTFE |
Pressure rating max# | 500 bar |
Pressure rating- note | oil pressure rated |
Sealing ring- part number | 149621 |
Sealing ring- size | 6.75 + 1.78 mm |
